How to Install a Ridge Wallet Money Clip: A Step-by-Step Guide

So, you’ve snagged yourself a sleek Ridge Wallet and now you’re itching to ditch the bulky traditional wallet for good? Excellent choice! One of the best features of the Ridge Wallet is its modularity, allowing you to customize it to fit your specific needs. If you’re looking to add or replace a money clip, you’ve come to the right place. Installing a Ridge Wallet money clip is a surprisingly straightforward process, even for those who aren’t typically DIY-inclined. Let’s dive in and get those bills secured.

How to Install a Ridge Wallet Money Clip?

The process hinges on a few key steps: disassembly, placement, and reassembly. Here’s a clear, concise breakdown:

1. Gather Your Tools: You’ll need the Ridge Wallet, the money clip, and the provided T5 Torx screwdriver (the little one that came with your wallet). Ensure you have a clean, well-lit workspace to avoid losing any small parts.
2. Disassemble the Wallet: Carefully unscrew the outer plates of your Ridge Wallet using the T5 Torx screwdriver. Typically, there are two screws on each side holding the plates together. Loosen them gradually and evenly to prevent stripping the screws. Once loosened, carefully remove the plates.
3. Locate the Money Clip Mounting Holes: On one of the inner elastic straps, you’ll find pre-drilled holes designed specifically for the money clip. These holes are positioned near the edge of the strap.
4. Position the Money Clip: Align the holes on the money clip with the corresponding holes on the inner elastic strap. Make sure the clip is oriented correctly – the curved part of the clip should face outwards.
5. Reassemble the Wallet: Now, carefully place the outer plates back onto the wallet, sandwiching the money clip and elastic strap in between.
6. Secure the Screws: Begin tightening the screws using the T5 Torx screwdriver. Again, tighten them gradually and evenly, alternating between screws on each side to ensure even pressure. Avoid over-tightening, as this can damage the screws or the wallet plates. Tighten them until they are snug and the plates are securely held together.
7. Test the Money Clip: Once assembled, test the money clip by inserting and removing a few bills. Ensure it holds the bills securely and functions smoothly.

Congratulations! You’ve successfully installed your Ridge Wallet money clip.

Frequently Asked Questions (FAQs) About Ridge Wallet Money Clips

Here are some common questions that often arise during or after the installation process.

Can I install a money clip on both sides of the Ridge Wallet?

While technically possible, it’s not recommended. Installing a money clip on both sides would significantly increase the wallet’s thickness and defeat the purpose of its slim design. The primary purpose of the Ridge Wallet is minimalism, therefore, it’s designed to function optimally with a single clip.

What if I stripped the screw while disassembling the Ridge Wallet?

Stripped screws are a common frustration. First, try using a rubber band or piece of steel wool between the screwdriver and the screw head to provide extra grip. If that fails, you can try using a screw extractor tool. Alternatively, contact Ridge Wallet’s customer support. They may be able to provide replacement screws or offer additional solutions.

What type of screwdriver do I need for a Ridge Wallet money clip installation?

You will require a T5 Torx screwdriver. This is the specific size and type of screwdriver designed to fit the screws used in the Ridge Wallet. Using a different type or size of screwdriver could damage the screws or the wallet.

How do I know if I’ve over-tightened the screws?

Over-tightening can lead to damage, so pay close attention. Signs of over-tightening include: difficulty turning the screwdriver, a clicking sound, or visible deformation of the wallet plates. If you suspect over-tightening, immediately loosen the screws slightly.

Can I use Loctite on the screws to prevent them from loosening?

While using a small amount of Loctite (specifically the blue, removable kind) could help prevent screws from loosening, it’s generally not recommended by Ridge Wallet. It can make future disassembly more difficult and potentially damage the screws or the wallet. Check your screws regularly and tighten them if necessary.

What if I lost the screws for my Ridge Wallet?

Contact Ridge Wallet’s customer support immediately. They often provide replacement screws for a small fee or even free of charge. Alternatively, you might be able to find replacement screws online, but ensure they are the correct size and type (T5 Torx).

My money clip feels loose. How do I fix it?

A loose money clip usually indicates that the screws are not tightened enough. Carefully tighten the screws, making sure to do so evenly. If the clip remains loose, inspect the elastic strap and money clip for any damage or wear. Replacing either the strap or the clip may be necessary.

What is the best way to clean my Ridge Wallet and money clip?

For the wallet plates, use a soft cloth dampened with mild soap and water. Avoid abrasive cleaners, as they can scratch the surface. For the money clip, you can use the same method. Ensure both are completely dry before reassembling.

Can I use a third-party money clip with my Ridge Wallet?

While theoretically possible, it’s not recommended unless the third-party clip is specifically designed to be compatible with the Ridge Wallet. The mounting holes and dimensions may not match, potentially damaging your wallet. Stick with genuine Ridge Wallet accessories for optimal compatibility and performance.

What is the difference between the money clip and the cash strap?

The money clip is a metal clip that holds bills securely against the wallet. The cash strap, on the other hand, is an elastic band that wraps around the wallet to hold bills or cards. The choice between the two is primarily a matter of personal preference. The money clip generally holds more cash while the cash strap will be slightly more low-profile.

How much money can the Ridge Wallet money clip hold?

The money clip can typically hold up to 15 bills comfortably. However, this depends on the thickness of the bills. Overloading the clip can reduce its effectiveness and potentially damage it over time.

Will the money clip scratch my cards?

While it’s unlikely, the edges of the money clip could potentially scratch cards if they are repeatedly rubbed against it. To minimize this risk, ensure your cards are inserted smoothly and avoid overfilling the wallet. You might consider using card sleeves for extra protection.