Table of Contents

Mastering Your Entertainment Hub: Programming Your DirecTV Remote to Your LG TV

Want to ditch the clutter of multiple remotes and control both your DirecTV receiver and LG TV with a single device? You’ve come to the right place. Programming your DirecTV remote to your LG TV is a relatively simple process, and this guide will walk you through it step-by-step, ensuring you can streamline your entertainment experience in no time.

The Definitive Guide: Programming Your DirecTV Remote to Your LG TV

There are several methods to program your DirecTV remote to control your LG TV. The most common and reliable methods involve using Direct Code Entry, Auto Search, or the DirecTV Remote Setup Tool either online or via your receiver. Let’s break each method down:

Method 1: Direct Code Entry

This is the most precise and generally the fastest method if you have the correct code.

Find the Correct Code: Locate the DirecTV remote code specific to LG TVs. You can find this code in your DirecTV remote manual, online on the DirecTV website, or by using an online remote code finder tool. Look for codes starting with numbers like “10178”, “11423”, “10030”, “10856”, or “11178”. These are frequently used for LG televisions. It is crucial to understand that different LG models require different codes.
Power On Your TV: Ensure your LG TV is powered on.
Enter Programming Mode: On your DirecTV remote, slide the mode switch to the TV position.
Press and Hold MUTE and SELECT: Press and hold the MUTE and SELECT buttons simultaneously until the green light flashes twice. This indicates you’ve entered programming mode.
Enter the Code: Enter the 5-digit code you found for your LG TV. If the code is accepted, the green light will flash twice again. If it doesn’t, the light will give a longer flash. This means the code was not accepted, and you should try a different code.
Test the Remote: Point the remote at your LG TV and press the POWER button. If the TV turns off, you’ve successfully programmed the remote. If not, repeat steps 3-5 with a different code.
Lock in the Code: If it works, press the SELECT button to lock in the code. The green light should flash twice.

Method 2: Auto Search

If you can’t find the correct code, the Auto Search method will cycle through all available codes until one works. This process can take a bit of time.

Power On Your TV: Ensure your LG TV is powered on.
Enter Programming Mode: On your DirecTV remote, slide the mode switch to the TV position.
Press and Hold MUTE and SELECT: Press and hold the MUTE and SELECT buttons simultaneously until the green light flashes twice.
Enter 9-9-1: Enter the code 9-9-1. The green light will flash twice.
Point and Press POWER: Point the remote at your LG TV and repeatedly press the POWER button. After each press, wait two seconds to see if the TV turns off. The remote is sequentially testing each code.
Confirm and Lock In: Once the TV turns off, immediately press the SELECT button. This locks in the code that worked. The green light should flash twice.
Test the Remote: Test all the primary functions like volume, channel, and input selection to ensure they are working correctly. If not, you might need to repeat the Auto Search process.

Method 3: Using the DirecTV Remote Setup Tool

DirecTV offers a convenient online tool and interface via the receiver itself to help you program your remote.

Online Tool: Visit the DirecTV website and search for “Remote Control Programming.” Enter your remote model number and your LG TV brand. The tool will guide you through the programming process and provide specific codes.
Via the DirecTV Receiver:
1. Press the MENU button on your DirecTV remote.
2. Navigate to Settings & Help and select Settings.
3. Select Remote Control and then Program Remote.
4. Follow the on-screen instructions, selecting your LG TV brand when prompted. The receiver will guide you through either code entry or auto-search methods.

Troubleshooting Tips

Fresh Batteries: Always ensure your DirecTV remote has fresh batteries. Low batteries can cause erratic behavior during programming.
Clear Line of Sight: Make sure there is a clear line of sight between the remote and the TV’s infrared (IR) receiver.
Check the Mode Switch: Ensure the mode switch is set to TV when programming and using the remote for TV functions.
Multiple Codes: If the first code doesn’t work, try other codes listed for LG TVs. Different models require different codes.
Reset the Remote: If you are having persistent issues, try resetting the remote by removing the batteries for a minute and then reinserting them.

Frequently Asked Questions (FAQs)

1. Where can I find the DirecTV remote code for my LG TV model?

You can find the DirecTV remote code for your LG TV in several places:

DirecTV Remote Manual: Check the manual that came with your DirecTV remote.
DirecTV Website: Visit the DirecTV website and use their Remote Control Programming tool.
Online Remote Code Finders: Many third-party websites offer remote code finders. Just search for “DirecTV remote codes for LG TV.”

2. What if none of the codes I try work?

If none of the codes work, try these troubleshooting steps:

Double-Check Codes: Make sure you’re entering the codes correctly.
Auto Search: Use the Auto Search method as a last resort.
Contact DirecTV Support: Contact DirecTV customer support for assistance. They might have model-specific codes or solutions.

3. How do I know which DirecTV remote I have?

Your DirecTV remote model number is typically located on the front of the remote at the bottom, or inside the battery compartment. Knowing your remote model number is essential for using the DirecTV online tool or getting assistance from support.

4. Can I program my DirecTV remote to control other devices besides my LG TV?

Yes, your DirecTV remote can be programmed to control other devices such as DVD players, Blu-ray players, and audio receivers. Just slide the mode switch to the corresponding device (e.g., DVD, AV1, AV2) and follow the programming steps using the appropriate codes for those devices.

5. What does it mean when the green light on my remote doesn’t flash twice after entering a code?

If the green light doesn’t flash twice after entering a code, it means the code was not accepted by the remote. This could be due to an incorrect code, a weak battery, or a problem with the remote itself. Double-check the code and try again with fresh batteries.

6. How do I reset my DirecTV remote to factory settings?

To reset your DirecTV remote:

Slide the mode switch to DIRECTV.
Press and hold MUTE and SELECT until the green light flashes twice.
Enter 9-8-1. The green light will flash four times, indicating the remote has been reset.

7. My DirecTV remote used to work with my LG TV, but it suddenly stopped. What happened?

Several factors could cause this:

Battery Issues: Check and replace the batteries.
Code Loss: The remote may have lost its programming. Try reprogramming it using the Direct Code Entry method.
IR Interference: Ensure there’s no interference with the IR signal.
Remote Malfunction: The remote might be malfunctioning and need to be replaced.

8. Can I program my DirecTV Genie remote to control my LG TV?

Yes, the DirecTV Genie remote can be programmed to control your LG TV. The programming process is the same as with other DirecTV remotes, using the methods described above.

9. What if my LG TV is an older model? Will the DirecTV remote still work?

Yes, the DirecTV remote should still work with older LG TV models. However, you might need to try different codes or use the Auto Search method to find a compatible code. The key is persistence.

10. Is there a universal code that works for all LG TVs?

Unfortunately, there is no single universal code that works for all LG TVs. Different models require different codes. This is why trying multiple codes or using the Auto Search method is often necessary.

11. What if I lose my DirecTV remote manual?

If you lose your DirecTV remote manual, you can find the codes and programming instructions on the DirecTV website or by using an online remote code finder.

12. How do I program my DirecTV remote to control the volume on my LG TV?

Once the DirecTV remote is programmed to control your LG TV, the volume buttons should automatically control the TV’s volume. If they don’t, double-check that the mode switch is set to TV and that the correct code has been entered and locked. You might need to reprogram the remote if the volume control isn’t working.