- 1 Top 10 Rated car mount for iphone in 2022 Comparison Table
- 2 Our Best Choice: iOttie Easy One Touch 4 Dash & Windshield Universal Car Mount Phone Holder Desk Stand for iPhone, Samsung, Moto, Huawei, Nokia, LG, Smartphones
Top 10 Rated car mount for iphone in 2022 Comparison Table
- EASY ONE TOUCH MECHANISM: Press the locking side arms with a quick one-handed motion, and place your phone against the trigger button. The mount’s arms will close automatically, holding your device securely while you drive. Mount or remove your phone in seconds with the patented Easy One Touch Mechanism.
- WIDE COMPATIBILITY: New larger Easy One Touch button, with a universal cradle that fits smartphones and cases of any size.
- MAGNETIC CORD ORGANIZER: Keep charging cables neatly organized with the magnetic tab located near the bottom foot
- TELESCOPIC ARM: The improved telescopic arm now extends from 5 inches to 8 inches (as opposed to the Easy One Touch 4 which only extended to 6.5inch) and pivots 260 degrees. This enables a myriad of customized viewing angles while you’re on the road.
- ADJUSTABLE BOTTOM FOOT: You can easily and securely adjust the bottom foot by squeezing the spring button.
- [ vanva Ultimate Car Phone Holder ] With the latest improved vent clip [Don't Slip & Drop], this car phone holder could hold your phone firmly even on the bumpiest road or sharper turn. This phone car holder is made from the most advanced durable sturdy aviation-grade materials,it is the first phone mount car to pass most extreme test on the market, making it more resistant to abrasion and corrosion.
- [ Screw the Vent Clamp Tightly & Secure Stable Install ] vanva car phone mount adopts the latest screw mechanial lock design which holds your phone securely to the vent. Screw the clamp and the rubber clip hook will catch one of the car air vent blades tightly, even if you hit a bump or a sharper turn. After take few seconds to install it well, which won't distract you from driving.
- [ Rotate Freely & Adjust Perfect Angle as You Like] Dual to the 360-degree swivel head, your phone can be rotated easily to landscape and poraits as well as anywhere in between, with the vanva car mount. This air vent car mount allow you secure your smartphone to the air vent firmly, keeping it in place whilst the optimal viewing angle. Easily lay and remove your phone using the widely comfortable phone cradle with instant release button.
- [ Hold Your Phone Stably & Drive without Distracting ] vanva phone mount holder has anti-slip rubber pads, stable support shelf, firm & scratch-free claw offer secure grip for your cellphone to ensure safer driving. With all above these, the stability increase 5 times, even can stable support big phones and thick cases.
- [ Fit Universally & Get 24 Months Worry Free Warranty ] With our car phone mount, you'll enjoy 24 months warranty. This cell phone car mount is fit for almost all phones, include iPhone 14/ 14 plus/ 14 Pro/ 14 Pro Max /13/ 13 Pro / 13 Pro Max/ 12/12 Pro/12 Pro Max/12 Mini/SE/ 11 /11 Pro /11 Pro Max /XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / 5s / 5, Samsung Galaxy S10 / S10+ / S10e / S9 / S9+ / S8 / S8+ /Note 10+ /Note 10 / Note 9/Note 8/ S7 / S7 Edge / S6 S6 Edge / S5 / S4, LG, Google Pixel etc.
- Upgraded Vent Clip: The Car phone mount features a stronger, thinner vent clip and an innovative support ring for extra support, which could hold your phone securely on an air vent in your car. NOTE: THIS CAR MOUNT FOR PHONE is ONLY MATCHED WITH HORIZONTAL BLADE AIR VENTS
- Adjustable Attachment: The phone holder car features an adjustable support ring, it can be rotated to any angle without blocking the vents. The Adjustable Bottom Foot can fit all phones
- Innovative Hollow Silicone Rubber: The car mount for iPhone is armed with an innovative hollow silicone rubber, which is more stable when compared with other common silicone rubbers. When you put your phone on the car phone mount, your phone can fully fit the hollow silicone rubber cushion so that it won't drop at all
- Perfect Protection: The car vent phone mount is equipped with a thick layer of silicone which could protect your smartphone from wear and tear
- Ideal Viewing Angle: The 360° rotating and pivoting ball joint can be adjusted to any viewing angle and quickly switch between vertical and horizontal visual angles
- 【Selfie Stick Tripod】: Bluehorn*YUN TENG Joint brand Model. Wireless Remote Control. The range of the wireless connection can be up to 10 meters. It can be perfectly Compatible with Most Smart Phone in Market, Such as iphone 14 13 12 11 pro max XS MAX 8 6 7 Plus Android Samsung Galaxy note 20 10 S10 S9 etc. The selfie stick body is made of Aluminum Alloy and the legs are made of highly tough ABS which will keep the tripod very strong and sturdy.
- 【Wireless remote shutter】wireless remote control shutter ,fast connecting speed and low engery cost,offer you a long time use.The range of the wireless connection can be up to 10 meters and widely compatible with most Android smart phones like All The XR/XS/X/8/7/6 series Or Plus series, Samsung Galaxy series, etc.
- 【Notice】Becasue of cellphone system, only some Android devices can run the "Zoom In" and "Zoom Out" functions with the wireless remote control. Apple devices including iphone and ipad Do Not support zoom in/ out function.
- 【Service 】Please feel free to contact us if you have any problems,we will do our best to serve you.
- Package list: 1 x Extendable Selfie stick tripod, 1 x Phone Holder, 1 x Remote Controller, 1 x Micro-USB Cable , 1 x User Manual
- Adjustable-height tripod made of lightweight aluminum; weighs just over a pound
- 3-way head allows for tilt and swivel motion; portrait or landscape options
- Quick-release plate helps ensure fast transitions between shots
- 3-section, lever-lock legs for easy height adjustments; zippered storage bag included
- Measures 16.5 inches (collapsed); extends up to 50 inches
- 【3-In-1 Selfie Stick and Tripod Stand】Selfie stick tripod can be extended between 8.07 to 40 inches, which makes it very suitable for Photograph, Face time, Business, living broadcasting more. It features a fully expandable handheld selfie stick handle with built-in collapsible legs that allow it to double as a stand-alone tripod when opened. You can easily switch between Selfie Stick Mode & Phone Tripod Mode for your preferred use.
- 【with Remote Shutter】: Wireless remote control. The range of the wireless connection can be up to 10 meters. Remote control can take up to 1,000+ photos. It can be perfectly Compatible with most smart phone in market, iOS/Android Compatible. You do not need to worry about the connection issue.
- 【Lightweight and Portable】:The professional & lightweight selfie stick tripod with remote is made of high-quality aluminum alloy and ABS materials, Only 7oz weight. It is compact and lightweight enough to store and take anywhere you go. Pack it in your purse, backpack, or suitcase without making a dent.
- 【Adjustable Angle and Rotatable Phone Holder】: 360°Rotatable Phone Holder and 180° Rotation Head allow you could take photos, video call or live broadcasting.
- 【Widely CompatibleUniversal 】: Notice :Phone or Camera Weight Limit 300 Grams.phone Holder fits most smartphones, compatible with All iPhone/Android Smart phones. With universal 1/4 inch screw, it fits for digital camera, DSLR, SLR, action camera , webcam, camcorder.
- NOTE: ONLY USE THE EXTRA DASHBOARD PAD WHEN THE SUCTION CUP CAN NOT ATTACH ON THE SURFACE CLOSELY
- NOTE: NOT RECOMMENDED TO USE THE EXTRA DASHBOARD PAD FOR WINDSHIELD MOUNTING
- Broad Vision: Qifutan cell phone car mount features a 16cm/6.2in aluminum long gooseneck that sends your phone much closer to you. It can be mounted on the dashboard or windshield firmly. Most importantly, you can bend it in every direction to avoid obstructing the view
- Secure Steady Installation: Qifutan car mount for iphone 13/12/11 features an extra-strong vacuum suction cup with a layer of super sticky gel, a locking lever, and an anti-shake stabilizer. It sticks securely and easily on the dashboard or most flat surfaces and removes the phone car mount without leaving any nasty marks. (Note: use warm water to wash the car holder's suction cup if the surface is dirty or it can not stick firmly, then let it air dry.)
- One-Hand Operation: Press the button on the lower back of the car mobile phone holder to take out your phone, and press the back edge of the clamping arms to secure your phone with one hand. Make your operation more fluently. Fit well for the smartphone which’s the width between 4''-7''in and the most thickness
- 👍UPGRADE HOOK CLIP:The "hook shape" of this car phone holder mount creates "three gripping places" that firmly grasp the air outlet blades. Even when driving on uneven roads, it won't come off. The car mobile phone holder was created for innovation and usefulness, and it addresses the market's common issue of easy slipping off.
- 👍LOCK YOUR PHONE FIRMLY: LISEN Magnetic Phone Car Mount with 6 built-in strong magnets, the maximum bearing up to weight of 4 cellphones. Powerful suction keep your cellphone stay stably even when drive on a bumpy road. PLEASE NOTE：1. It is recommend that use the “square pad” on the back of your phone/case. It is more stable than the round. 2. ANY DEVICE NEEDS TO USE THE METAL PALTE EVEN iPhone 12 and iPhone13 and iPhone 14.
- 👍EASY TO INSTALL: Due to the unique hook clip design, this iphone car mount is incredibly simple to install. Simply place it on the air outlet blade of the car and flip the knob to change the clip's length to fit the socket. The installation is completed.
- 👍 CONVINCING QUALITY & UNIVERSAL COMPATIBILITY: LISEN car phone holder won SGS RoHS & SGS CP65 official certification and passed the magnetic force, telephone signal, hook stability and ingredient safety test. Quality is strictly controlled. The car holder holds most smartphones and mini tablets compatible with iPhone 14 13 12 11 pro max / XR / X / 8/7/6/5, Note 9 / Galaxy Note20 U, S21 S20 S10 S9 S8 S7 S6, iPad Air 2 / Mini 3 / Pro 9.7 and more.This product cannot work with MagSafe.
- 👍OFFICIAL CERTIFIED& WIDELY COMPATIBLE: LISEN Car Phone Holder is officially certified by SGS RoHS and SGS CP65, and has passed tests for magnetism, phone signal, hook stability and ingredient safety. The quality-controlled car mount is compatible with the following devices: iPhone 13 12 11 pro max / XR / X / 8/7/6/5, Note 9 / Galaxy Note20 U, iPad Air 2 / Mini, and other smart phones and Mini Tablet 3 / Pro 9.7 and above. NOTE:IT CAN’T BE USED WITH MagSafe!
- [3-in-1, Suitable for All Cars] andobil car mount has nano gel suction cups and steel core vent clips, can be firmly fixed on the dashboard, windshield and also vents, suitable for trucks, SUVs, all cars.
- [Super Suction Cup, Rough Road Friendly] Upgraded three-layer nano-gel suction cups form a strong vacuum double lock with one click, up to 65 pounds suction force firmly grips the dashboard, stable as a rock, potholes and bumps and other rough roads.
- [Triangular structure to hold your phone firmly] Andobil phone mount features a non-slip rubber pad, solid support frame and strong and scratch-free claws to form a solid triangle support to ensure your smartphone sits firmly in the car mount like a baby while driving, without distracting you from driving.
- [Easy adjustable long arm to keep your phone within reach] The improved and extended 7.3 inch mechanical arm can be adjusted 270°. With 360° rotatable universal ball head, you can adjust your phone to the most convenient position and angle for you, so you can operate your phone comfortably and easily while driving.
- [Deeper and wider clip arm, compatible with all phones] Extra wide and deeper adjustable clip arm, can accommodate larger and thicker phones, compatible with all 4-7 inch smartphones.
- 👍ExpertHolder fit for MagSafe: Our Master Magnet Car Phone Mount with Non-blocking/Mag safe Function is designed to create the perfect mood for every drivers' experience. With extension arm and free angle adjustment, they can create a comfortable ambience, or a vivid, bright and refreshing driving atmosphere - which suits your car best.
- 👍More Stable, Less Blocking: LISEN brand laboratory has upgraded this magsafe car vent mount from 3 directions.①Upgrade extension arm to protect your phone overheating crash; ②Cell phone holder for car mount with most stable "Steel Hook";③Magnetic phone car mount that has the strongest magnet force, which can hold up to 10 iPhone 13 Pro Max. LISEN provides at least 1 years of user service.
- 👍Protect Your Phone & Vent: This phone holder for for car vent is made of silicone. It will protect your mobile phone and automobile vent from scratches. Enjoy easy navigating, charing, calling, talking or listening to music on this carmount!
- 👍Compatible with Horizontal & Vertical Vents: The Steel hook clip of this cell phone mount for car is 50% longer than the ordinary one. It’s compatible with most Horizontal & Vertical vents, which solves the common problems of poor compatibility and cradle easy falling off on the market. We upgrade the iPhone car holder to meet all the needs of the car vent. Note: Round vents may not fit.
- ❤️️Doing Responsibly and Sustainably❤️As a responsible company, Lisen operates sustainably, to high environmental and social standards. We continue to embed sustainability ever deeper in the way we do business – in our own operations and beyond, together with our suppliers. Lisen cell phone holder for car also comes with 12 months warranty. Our expert team always stands by your side.
Our Best Choice: iOttie Easy One Touch 4 Dash & Windshield Universal Car Mount Phone Holder Desk Stand for iPhone, Samsung, Moto, Huawei, Nokia, LG, Smartphones
From the manufacturer
Getting to Know the Easy One Touch 4
The iOttie Easy One Touch 4 Dashboard & Windshield Mount is a universal smartphone solution that is engineered to safely enhance your driving experience. The one of a kind Easy One Touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. Utilize the range, strength, and stability of the telescopic arm to find the perfect position for your smartphone..
Quick Tips & Features
Easy One Touch Lock & Release
The one of a kind Easy One Touch mechanism allows you to easily mount and remove your smartphone with one simple hand motion. This product or its use may be covered by U.S. Patents: 8,627,953
Foot on the bottom of Mount Cradle can be adjusted side-to-side, up and down, or removed to hold smartphones and cases of all sizes.
Suction Cup can be restored by simply rinsing under warm water and air drying.
Quick Tips & Features
Learn the names of each part included on the Easy One Touch 4 Car Mount.
Universally holds all phone and case combinations from 2.3” -3.5’” includes Easy One Touch mount locks and release system.
Download the iOttie DriveSmarter app with a GPS location system to help you find the location of where you last parked.
Dashboard / Windshield
Dashboard / Windshield
Dashboard / Windshield
Dashboard / Windshield
Easy One Touch Locking Mechanism
Automatic Open & Close
Adjustable Viewing: The newly re-designed telescopic arm extends from 4 – 6.5 inch and pivots on 225 degree arc for a variety of optimal positions
Universal Mounting: Holds all phone and case combinations from 2.3 inches to 3.5 inches
Strong Suction: 1 time use dashboard disc and reusable suction cup combo offers superior stick strength
Bottom Foot: Foot on the bottom of mount cradle can be adjusted side to side, up and down, or removed to hold smartphones and cases of all sizes